To facilitate some special experiments, RF WebLab results will deviate from normal starting Monday, March 22nd.
Later, it will be announced when RF WebLab is expected to be functional as normal.
Best regards,
Koen Buisman
RF WebLab UP! (17/3/21)
We succesfully replaced the broken component in RF WebLab today. The system is up and running again.
We also took this opportunity to slightly reduce the ACPR asymmetry, as illustrated by the screenshots below. This is actually a return to an old configuration as existed before.
Enjoy your continued use of RF WebLab!
Koen Buisman on behalf of the RF WebLab team.
RF WebLab hardware failure 3
The new hardware has arrived. Hopefully it will be an easy replacement of the defective component.
I’ll keep posting updates here.
Koen Buisman
RF WebLab hardware failure 2
After investigation we found one defective component in RF WebLab. A replacement has now been ordered.
I’ll keep posting updates here.
Koen Buisman
RF WebLab hardware failure
I regret to inform you we most likely have a hardware failure in RF WebLab. This means for now WebLab will be unavailable for an undetermined time.
I will keep posting updates here.
Best regards,
Koen Buisman
RF Weblab up (25/01)
RF WebLab is up and running again. Most likely some network connectivity issues happened during the weekend, impacting all traffic to and from RF WebLab. After restarting the RF WebLab server today, it seems everything is working fine again.
Koen Buisman
RF WebLab down (23/01)
I have noticed WebLab is down. Even remote access to WebLab is down, therefore I have no means to investigate. Hopefully Monday someone will be available to take a look. I will keep you updated.
Koen Buisman
RF WebLab DUT changed back to normal
We’re planning to change back the to the regular DUT today at 17:00 Swedish time. We do expect that the temporary DUT will be back in the system in one or two weeks from now again.
Best regards,
Koen Buisman
30/07/20 RF WebLab interruptions today
We are working on a server update. RF WebLab will be interrupted from time to time today.
Best regards,
Koen Buisman
RF WebLab hardware change
We found an isolator was not isolating as expected. This isolator has been replaced. This hardware change may slightly change your results compared to before.
Best regards,
Koen Buisman