RF WebLab is now up and running again. Enjoy!

Best regards,
Christian Fager

Unfortunately RF WebLab went offline during the weekend. We will activate WebLab again the second week of August.

Best regards,

Koen Buisman

RF WebLab is available again. It seems the primary hardware issue related to a bad contact or bad cable which had changed over time. We still see some secondary effects, which will require some more time to investigate, for now RF WebLab is available as normal.

Best regards,

Koen Buisman

We’re trying to isolate a potential hardware issue. For this purpose RF WebLab is up and running.

RF WebLab is not available yet.

Best regards,

Koen Buisman

Until further notice RF WebLab is offline. Unfortunately the system suffered a hardware failure. I will update here when more information becomes available.

Best regards,

Koen Buisman

We see strange effects in the measured data from RF WebLab. At this moment it is unclear what the cause is. Further investigations are continuing.

Best regards,

Koen Buisman

We changed the coupler section of RF WebLab today. This may have some impact on the future measurement results coming from weblab.

We will still make some more small changes this week until everything is finalized.

Best regards,

Koen Buisman

Experiments are still ongoing. Based on these experiments there will be some changes in hardware, which will be installed after the IMS. This may have some impact on the future measurement results coming from weblab.

If you want to use the results from weblab this week, note that the reported output power is about 4 dB lower than typical, for which you can compensate.

Best regards,

Koen Buisman

Due to some special experiments, RF WebLab may give different result from normal this week.

Next week RF WebLab is expected to be functional as normal.

Best regards,

Koen Buisman

RF WebLab is up and running again.

Let us know if you encounter unexpected behavior from RF WebLab.

Best regards,

Koen Buisman